OPTICAL PROPERTIES Test Value Light Transmittance ASTM D-1003 98% Parallel Light Transmittance ASTM D-1003 97.9% Haze ASTMD-1003 0.001% Reflection Value AT 550 nm <0.5% PHYSICAL PROPERTIES Specific Gravity ASTM D-792 1. 19g/cm3 Elongation ASTMD-638 5% Flexural Rupture Strength ASTM D-790 800kg/cm2 Heat Distortion Temperature ASTM D-648 110 C Maximum Recommended Permanent Temperature 80 C Coefficient of Thermal Expansion ASTM D-696 7x10 -5/ C Heat Resistance 100hr at 80 C No Change Cold Resistance 1OOhr at -40 C No Change Humidity Resistance 40 C at 90% x 1OOhr No Change Thermal Wear -40 C -80 C (10 cycles) No Change UV Resistance 100 hr No Change Pencil Hardness 6H-8H CHEMICAL RESISTANCE Against: Change in Appearance Isopropyl Alcohol No Change Soapwater Solution No Change Sodium Carbonate Dissolved Sulfuric Acid Dissolved Water No Change ESI’s NEW VIEWMAX coatings on acrylic or polycarbonate offers premium protection and glare reduction for all outdoor display applications that require the BEST. PRODUCT INFORMATION: OPTION I • VIEWMAX/AR Double Side Multi-Layer Anti-Reflective Coating Double Side Hard Coat Front Surface AFP (Anti-Finger Printing) Coating 98 % Transmission <0.5% Max. Size: 600mm X 1000mm Thickness: l.0mm/1.5mm/2.0mm OPTION II • VIEWMAX/AR/NG Double Side Multi-Layer Anti-Reflective Coating Double Side Hard Coat Front Surface Non-Glare Coating Front Surface AFP (Anti-Finger Printing) Coating 98 % Transmission <0.5% Max. Size: 600mm X 1000mm Thickness: 2.0mm OPTION III • VIEWMAX/AR/NG/ITO Double Side Multi-Layer Anti-Reflective Coating Double Side Hard Coat Double Side ITO Coating 100 ohms/sq per coated side/ 40 ohms/sq overall Front Surface Non-Glare Coating Front Surface AFP (Anti-Finger Printing) Coating 98% Transmission <0.5% Max. Size: 600mm X 1000mm Thickness: 1.0mm/1.5mm/2.0mm/3.0mm